Your cart is currently empty!

You’ll leave knowing how to set a calibration frequency, what to ask a lab, and how to keep records an auditor will accept.
Quick test. Find the date on your logger’s last calibration certificate. Can you do it in under a minute?
If not, you’re not alone. Plenty of teams buy a logger, trust it, and forget it. Then an audit or a questionable shipment shows up.
This guide covers temperature data logger calibration in plain terms. You’ll learn how often to do it, why, and what to do when the date is already late.
Temperature data logger calibration means comparing your logger’s readings to a trusted reference, then recording any difference. The reference should be NIST-traceable, and you must document the deviation.
Temperature sensor calibration matters because sensors drift. One vendor source reports drift of about ±0.1°C to ±0.5°C per year. That sounds tiny. But a vaccine fridge or biologics freezer has very little room for error.
Here’s the thing: no single number fits everyone. But there’s a clear pattern.
Pharma, food, and medical device settings generally calibrate every 6 to 12 months, while R&D work can stretch to 12 to 24 months. One immunization resource says once a year, or every two years only if the manufacturer recommends it.
| Your situation | Typical interval | What it means for you |
|---|---|---|
| Pharma or GxP storage | 6–12 months | Tight tolerance, strict records |
| Vaccine storage | Yearly, or per your program | Check program rules first |
| General lab or R&D | 12–24 months | Write down why you chose it |
| Single-use shipment loggers | Not recalibrated | Check the certificate for your model |
Our stance: If a 1°C error can harm your product, don’t wait 24 months. Use 12 months at most, and go shorter if your data shows drift.
Tempnote has made loggers since 2013 and sells both types. Its single-use loggers arrive pre-configured, with a two-year shelf life. Multi-use models like the TH32 serve transport, thermal mapping, validation, and storage monitoring. The multi-use units are the ones that need a schedule. Confirm your model’s details with the manufacturer.
Ask yourself four questions.
How risky is your product?
A blood bank freezer needs more care than a dry-goods shelf.
How tough is the environment?
Ultra-low temperatures, dry ice, and rough handling push a logger harder. Humidity sensors also lose accuracy, about 2 to 3% RH per year by one vendor’s numbers.
What does your history show?
Compare as-found results year over year. Small, steady drift may justify a longer interval. Growing drift means shorten it.
Which rules apply?
Four frameworks come up most: ISO/IEC 17025, USP <1058>, FDA 21 CFR Part 211, and WHO/GDP guidance. One vendor report says 145 of 478 relevant pharma FDA warning letters in 2026 involved temperature or environmental monitoring failures. That’s a vendor figure, so check the original before you quote it. It still shows regulators are watching.
Here’s the calibration procedure in plain terms:
Calibrate the sensor and the logger electronics together. That avoids stacking errors.
An ice-point check at your desk is a fine sanity test. It doesn’t replace temperature monitoring device calibration done by an accredited lab.
Look for these in any provider of temperature logger calibration services:
One state immunization FAQ lists roughly $40 to $60 per device. Turnaround usually runs two to seven business days, so keep a spare logger ready. When you compare data logger calibration services, ask for a sample certificate first.
This example is made up, not a real client story.
Say you ship medicines every week. Your logger is 18 months past calibration. One day it reads 2°C below a trusted thermometer. Now you can’t prove three recent shipments stayed in range, and reviewing them eats days.
Avoid that with this audit:
Why bother? Auditors can ask for a certificate tied to a shipment from two years ago. If you can’t find it, the data loses its value.
So, how often should you calibrate? Start at 12 months. Move to 6 if your product is high-risk. Let your own drift data guide changes, and write down your reasoning. Good temperature data logger calibration protects your product and your audit file.
Next step: Run the audit today. Then ask your supplier, including Tempnote if you use its units, which paperwork ships with each model. Ready to book? Request a quote from a provider of data logger calibration services and get your fleet current.
Most regulated users calibrate every 6 to 12 months. Follow your manufacturer and your quality system.
Usually not, since you use them once and discard them. Check the certificate for your model.
Your readings become unreliable. You’ll need to review affected product and document your decision.
You can run basic checks in-house. For regulated data, use an accredited lab and keep the certificate.
One state health program lists about $40 to $60 per device. Prices vary by lab, range, and shipping.